MIPP Pump

MIPP  industrial centrifugal Plastic Pumps are designed and manufactured to meet the stringent requirement for handling corrosive liquids including moderate slurries. The pump design confirms to IS-5120 standard, which gives higher efficiency. All wetted parts coming in contact with media are injection molded, which can withstand in higher pressure. The pump shaft is protected from corrosive media with reliable sealing arrangement. Our pump manufacturing program ensures quality, reliability and trouble free operation for long duration.

DESIGN CONSTRUCTION DETAILS 
Casing, stuffing box and impeller are offered in Various Materials

• Polypropylene*
• UHMW
• HDPE
• Glass – Fibre Reinforced Polypropylene
• PTFE
  * Offered as standard

IMPELLER 
Solidly moulded semi-open Impeller with metal insert ensures high strength & durability. The Impeller is dynamically balanced to ISO 1940 to achieve minimum vibration and extended bearing life.

SHAFT 
As a standard shaft is offered EN-8 Materials. Different materials can be offered on request.

SHAFT SLEEVE  
Sleeve is a protecting the Shaft from the corrosive media and can be offered in various materials after confirming chemical compatibility.

• Ceramic (99.5% Alumina Oxide) *
• Alloy-20 (CN 7M)
• Hastelloy – C
• Hastelloy – B
• Monel
• Titanium
• Silicon Carbide
  * Offered as a standard.

MECHANICAL SEAL 
A single externally mounted PTFE bellows Mechanical Seal with various face combination is offered after confirming chemical compatibility.

• GFT v/s CERAMIC*
• GFT v/s SILICON
• CARBON v/s CERAMIC
• CARBON v/s SILICON
• SILICON v/s SILICON
  * Offered as a standard

SEALING 
‘O’ Ring and Gaskets Sealing are provided in the joints to ensure better sealing even at high pressure.

ACCESSORIES

PRIMING CHAMBER : This is specially used for negative suction. It is effective in handling liquids with slurry or particles, as it does not get clogged as easily as the foot valve.

TROLLEY  
A specially designed, vibration free trolley keeps the pump mobile, whenever required. Further, the trolley can also be provided with FRV coating on the parts exposed to chemical drip.

TECHNICAL SPECIFICATION OF PUMP